Home > Projects > Customer Comments■ Customer Comments

John, Did you see the figures for jan 6, nearly made 160kwh for the day, best day ever...
  - Allan, Australia, 16th. Jan, 2014


John, I have installed a few of your turbine and hit of 3 manufacturers, you have the most accurate and reliable power production eating. To be honest sawt is the only vawt I have dealt with that works.
  - Logan, USA, Oct, 2013


Good to hear from you. The Beswick turbine figures are impressive. Is this a 10kw machine? If so, peak outputs of 65kWh in a day is a good figure. Puts a lie to the notion that VAWTs don’t work. I’d say John is impressed….
  - Quentin, Ireland, Jul, 2013


I am a student of the university Gelsenkirchen in Germany and I am investigating on the wind turbine from your production (model: P-5000) which has been installed in Bottrop in Germany. The wind turbine has been put into operation on September 2011 by the company Emscher-Lippe-Energie GmbH. I have taken measurements which aroused some questions. The measured engine speed curve shows that the power is higher than the data you suggested on the information sheet ( please find it enclosed). There is a deviation of 50 to 70%...
  - from Patrick, Germany, Jul., 2013


Machine has been working perfectly in light winds (Summer period)
  - Matthew, Australia, Feb, 2013


Wanted to let you know that there has been a very successful installation of a 10Kw VAWT here in Tasmania, Australia. Machine is installed in an excellent wind harvest area and prominent position. Installation was fast and of excellent quality. Machine is well balanced and works perfectly producing good generation at all wind speeds. New brake is excellent as is the battery back up although we would like to know how long it will hold the turbine with no input charge from the mains supply. New coated nuts and bolts are superior to the stainless steel ones provided on the last unit.
  - Matthew, Australia, Jan, 2013


By the way Mattie says you will be very happy with our figures on the 10kw, he is more than impressed . The last 2 nights, Paul has had major winds at his house and so far all is good, he says he will have great figures from these winds. I was there 2 weeks ago and both inverters where on and average between 2500 and 4500 all morning.
  - Allan, Australia, Sep, 2012


On arrival the weather was so bad, pouring rain and strong winds, we set the 500 watt turbine up and it was spinning lovely,
  - Allan, Australia, Aug, 2012


Machine has been operating faultlessly since the brake dog was replaced. Machine is capable of generating far more in a better location.
  - Matthew, Australia, Jun, 2012


Plus everyone is super impressed by your turbine and it is pumping out good figures on windy days
  - Allan, Australia, Apr, 2012


The 10 Kw Machine, Stowport, Tasmania, Aust. has been running well, some days of 60 Kw hours+ outputted from the Turbine/Alternator over 24 hours. 12Kw peek outputs sustained with no trips, or load shed. Operating AC output voltages have fallen inside all Australian and Local Standards. Brakes have not operated for some time now, as Machine is correctly installed, programmed and commissioned running well.. PCI has been set up running Aurora Power 1 Software. Very interested in any Electrical Specifications on the new 50 Kw SAWT Machine, including Alternator, grid feed connections, controller output voltages, inverter used. Any information highly regarded as there is interest in this size machine from Customers and myself as installing engineer.
  - Matthew, Australia, Mar, 2012


John accidents happen, we are very impressed with your back up, the brakes work brilliant, 20 second stop in a 20 knot wind, great.
  - Allan, Australia, Nov, 2011



ALL 22          1/2  Previous  Next  End To Page